0.0	initial - signature only
0.1	check unlock state, request run toolbox, output detail info
0.2	save to sf_info.txt
0.21	optional save sf.bin and sf3.bin
0.22	check bug with driver for IDE mode of sata controller, never disted
0.23	add fid list output
	add format information info (cur/max PE cycle, sector align, raise, etc.)
	add manufacturing defect list (sf_mdl.bin)
	rename sf3.bin->sf_cdu.bin
	split sf.bin->sf_diag_info.bin+sf_diag_ident.bin
	for save binary now use "b" with disk number, for example: sf_info 0b
0.24	fixed output Max CE >65535
	add grown defect list (sf_gdl.bin)
	add panic dump list (sf_pdlist.bin)
	add text output defect list (to sf_info.txt only), it's wrong for sf1
	fixed "defects"->"defect list entry"
0.25	support >1sect size defect list
	limit defect list size to 1 sector for buggly pciide driver
	some changes defect list output format
0.251	add disk number input, when it not specified in cmdline
0.3	don't required SF Toolbox
	some usb support
	don't save CDU and limit defect list size to 1 sector for usb
0.31	can save CDU and read full defect list for usb
	drive list
0.32	update FID decoder
0.33	update FID decoder (intel+spectek, old imft, density per die)
0.34	optional can read 7sector size cdu
0.35	add hw revision output
	save binary format info (sf_fmt_info.bin)
	update FID decoder (some imft density)
0.36	exchange word in hw revision output
	add cdu smart settings and some other decoding (to sf_info.txt only)
	rename sf_cdu.bin to sf_cdu_bad.bin when bad driver
0.37	intel unlock key
0.38	toshiba unlock key
	fixed read error for 64*N entry defect list
	add support for >32CE fid list,	limit size to 1 sector (63CE) for buggly pciide driver
0.39	autoselect unlock key by CID1
	owc unlock key
	manual select for default key
	add mst setting log (sf_mst_set.bin)
	add mst result log (sf_mst_res.bin and partial decoded to sf_info.txt only)
0.391	autoselect unlock key by CID1/CID2
	mushkin unlock key
	save to sf_info.txt unlock and bad driver information
	save user overrided unlock information to sf_info.txt
	don't save mst logs for sf1
	decode mst setting log (to sf_info.txt only)
	save mst logs for diag locked drive
0.392	solidata unlock key
	user defined unlock key from cmd string
	restored save mst logs for sf1 (support from sf1/fw.360+, sf2/fw.31A+)
	add identify device binary saving (id.bin)
	percent calculate for mst resilt
